Norwalk Drywall & Sheetrock: Residential & Commercial Installation & Repair
Norwalk Drywall handles residential repair, full installation, and commercial buildout throughout lower Fairfield County — from a single water-damaged ceiling to a multi-suite office tenant improvement in Stamford.
We are a registered CT Home Improvement Contractor, fully insured with commercial general liability and workers' compensation. Our crews work to GA-216 finishing standards — Level 4 for standard painted walls, Level 5 for ceilings and high-sheen applications — using board from USG, National Gypsum, and CertainTeed selected to match the conditions of your specific project. Moisture-resistant panels below grade, Type X fire-rated assemblies where code requires, acoustic systems where sound control matters.
Whether you're a homeowner dealing with sudden water damage, a landlord managing turnover between tenants, a developer finishing a multifamily gut rehab, or a property manager coordinating a commercial buildout with a general contractor, we work within your timeline and pull our own sub-permits where required. We know what Stamford, Norwalk, and Fairfield inspectors are looking for and install accordingly — so your project doesn't stall over a wall assembly question at inspection.
Get a FREE Estimate
Why Norwalk Chooses Us
Average drywallers leave a dusty mess, miss deadlines, and deliver sloppy taping that ruins your paint job. That's why we solve those exact pain points directly:
- HEPA-Filtered Dust Containment: We seal off the work zone with heavy-duty plastic barriers and use advanced dust-extraction sanders to protect your furniture, carpets, and HVAC system from fine white dust.
- Level 5 Smooth Finish Standard: We specialize in full-surface skim coating to completely eliminate visible seams and shadows under Norwalk's bright coastal natural light.
- 24-Hour Paint-Ready Guarantee: If your painter identifies a single imperfection during the primer coat, our crew returns within 24 hours to fix it completely free of charge.
- Commercial & Multi-Family Compliance: For landlords, flippers, and GCs: We maintain full CT registration, carry comprehensive commercial liability and worker's comp insurance, navigate Norwalk permitting, and deploy multi-man crews to hit strict tenant-turnover and inspection deadlines.
Comprehensive Residential Drywall Services
Drywall / Sheetrock Repair & Patching
Holes, dents, and failed seams — repaired and finished to match your existing wall. We use paper tape over mesh for structural patches (mesh tape doesn't hold joint compound the same way on larger repairs), apply setting compound for the base coat and topping compound to feather the edges, and finish to a GA-216 Level 4 standard before handing off to paint. The patch disappears.
Water Damage Drywall Repair
Ceiling bubbling, soft spots, or brown staining after a leak means the paper face of the drywall has absorbed moisture and the board needs to come out — not just dry out. We remove damaged panels, assess whether the framing or insulation has been compromised, and reinstall using moisture-resistant drywall (USG Sheetrock PURPLE or National Gypsum eXP) where code or conditions call for it. We work alongside your insurance adjuster and can coordinate with mold remediation contractors before we close the wall back up.
Ceiling Repair
Cracks, sagging sections, and water stains on ceilings are our most common call in Fairfield County. Ceiling failures usually come down to one of three things: failed tape joints in the original install, water intrusion from above, or thermal movement in older homes with 3/8" board that's too thin to span the joist spacing without flexing. We diagnose the cause before we repair — otherwise the same crack comes back in 18 months.
Texture Matching
Orange peel, knockdown, skip trowel, hawk-and-trowel — every texture has a different technique and a different spray pressure, and mismatches are obvious under raking light. We sample the existing finish before touching the wall, and in older Fairfield County homes we frequently encounter hand-applied textures that require a hands-on approach rather than a hopper gun. Repairs are finished to GA-216 Level 4, then the texture is applied and primed so the patch reads identically to the surrounding wall after paint.
Popcorn Ceiling Removal
We remove acoustic texture ceilings and resurface to a smooth, paintable finish. In Connecticut, any home built before 1979 may have asbestos-containing material (ACM) in its popcorn texture — federal NESHAP regulations and CT DEEP require testing before any disturbance. We handle the sampling and coordinate with a licensed CT asbestos abatement contractor if the test comes back positive, so the project stays compliant and you're not exposed to liability at resale. After removal, we skim coat to a Level 5 finish — the standard for ceilings that will receive flat or eggshell paint where light raking reveals every imperfection.
Skim Coating
A full skim coat restores walls to a perfectly smooth, Level 5 finish — the highest GA-216 standard, where a skim layer of joint compound is applied over the entire surface and sanded to eliminate all tool marks and trowel lines. It's the right call for walls that have had wallpaper removed (which almost always damages the paper face of the drywall), plaster that's too far gone for spot repair, or new drywall that will receive high-sheen paint. We prime with a PVA drywall primer before skimming to seal the surface and prevent the mud from flashing, which is the step most DIY skim coats skip and why they telegraph under light.
Full Room Drywall Installation
New hang, taping, mudding, and finishing for additions, gut renovations, and complete room buildouts — installed to the appropriate GA-216 level for the finish you're applying. Standard painted walls get a Level 4 finish; walls receiving flat paint or texture can come in at Level 3. We use USG, National Gypsum, or CertainTeed board depending on availability and spec, always 1/2" for walls and 5/8" for ceilings unless fire-rating or span requires otherwise. We work directly with homeowners or alongside your general contractor.
Basement Drywall Finishing
We hang, tape, and finish drywall for basement conversions — including moisture-resistant board on below-grade walls, where standard drywall will fail within a few years. Connecticut building code requires a building permit to convert basement space into finished living area, and inspections cover framing, electrical, and drywall separately. We know what Stamford, Norwalk, and Fairfield inspectors are looking for and install accordingly — fire-rated assemblies where required, proper fastener schedules, and backing for any fixtures or built-ins your finish carpenter will be adding.
Garage Drywall (Fire-Rated)
Attached garages require a fire-rated separation between the garage and the living space under both the International Building Code (IBC) and Connecticut's adopted state building code — typically 1/2" Type X drywall on the garage side of the common wall and ceiling, or 5/8" Type X if the garage has habitable space above it. We install the correct UL-listed assembly so your project passes inspection without a callback. This comes up frequently at point-of-sale inspections in Fairfield County when buyers' attorneys flag unpermitted garage conversions or missing fire-rated drywall.
Soundproof Drywall
We design and install acoustic drywall assemblies based on the STC (Sound Transmission Class) rating your space actually needs — not just an extra layer of standard board. For meaningful sound reduction, that usually means QuietRock 510 or 530, resilient channel to mechanically decouple the wall from the framing, or a double-layer 5/8" system with damping compound between layers. Each approach has a different STC performance range and a different price point; we'll tell you which one makes sense for your situation before we start work.
Mold-Related Drywall Removal & Replacement
When mold has colonized the paper face or cavity side of drywall, the board has to come out — containment, removal, and reinstallation in sequence with your remediation contractor. Connecticut's property disclosure laws require sellers to disclose known mold conditions, which creates real urgency to remediate correctly and document the work. We reinstall using mold-resistant board (USG Sheetrock PURPLE, National Gypsum Gold Bond eXP, or CertainTeed GlasRoc where indicated), apply moisture-resistant joint compound, and coordinate the inspection sign-off with your remediation contractor's air quality clearance test before we close up the wall.
Home Addition Drywall
Full drywall scope for new additions — board selection, hang, tape, and finish to the level your paint and trim package requires. Matching the texture and finish level of the existing home is always the tricky part; we sample adjacent rooms before we start so new walls read identically to old ones after paint. We handle large square footage efficiently and can work around your finish carpenter's schedule so trim and built-ins go in on sequence.
Commercial Drywall Services
Commercial Drywall & Office Buildout
Tenant improvements, office partitions, and retail buildouts throughout Fairfield County — metal stud framing, drywall hang, taping, and finish, coordinated with your GC's schedule. We work to AWCI (Association of the Wall and Ceiling Industry) standards, pull our own sub permits where required, and are accustomed to phased buildouts where individual suites finish on rolling schedules. Stamford's commercial corridor — from downtown to Harbor Point to Springdale — is our primary service area, and we maintain relationships with the General Contractors active across those projects.
Fire-Rated Wall Assemblies (Commercial)
UL-listed Type X and Type C assemblies for commercial demising walls, corridor separations, stairwells, and occupancy-rated partitions. Every fire-rated assembly we install references a specific UL Fire Resistance Directory design number — not a field approximation — so it holds up under AHJ inspection and your certificate of occupancy isn't held up over a wall assembly question. We work to IBC Section 709 and 722 requirements and CT State Building Code, coordinate the inspection schedule with your GC, and document the assembly for your project closeout package.
Cost Estimates By Service
Prices below reflect typical project ranges in Fairfield County.
Final quotes depend on scope, access, and finish level required. All estimates are free.
Service | Typical Range | Notes |
|---|---|---|
Hole & Patch Repair | $150 - $400 | Single patch; texture match included |
Water Damage Repair | $500 – $2,500 | Varies by panel count and moisture extent |
Ceiling Repair | $300 – $800 | Cracks, sagging sections, water stains |
Texture Matching | $300 – $700 | Per repair area; orange peel, knockdown, skip trowel |
Popcorn Ceiling Removal | $1.50 – $3.00 / sq ft | Asbestos testing additional if pre-1979 |
Skim Coating (per room) | $900 – $2,800 | Level 5 finish; includes PVA prime coat |
Full Room Installation | $1,600 – $4,000 | Hang, tape, mud, sand to Level 4 |
Basement Drywall Finishing | $3,500 – $8,000 | Moisture-resistant board; permit coordination included |
Garage Drywall (Fire-rated) | $800 – $2,000 | Type X assembly per CT building code |
Soundproof Drywall | $2,000 – $6,000 | STC rating and system type affects price |
Mold-related Removal & Replacement | $1,200 – $4,500 | Coordinated with remediation contractor |
Commercial Buildout | Project-based | Contact us for a walkaround quote |
What to Expect When You Hire Us
Step 1: Free On-Site Estimate
We come to the job — no phone estimates for anything beyond a simple patch. We look at the scope, check for moisture if water damage is involved, sample your existing texture if matching is required, and give you a written quote before we leave. No surprises later.
Step 2: Scheduling & Permits
Most residential repair and finishing work can be scheduled within one to two weeks. For basement conversions, garage fire-rating, or commercial projects, we pull the required sub-permits before work begins and coordinate the inspection schedule with your general contractor or directly with the municipality.
Step 3: The Work
We show up when we say we will. Dust is contained with plastic sheeting; floors are protected. Setting compound goes on first for structural coats, topping compound for finish coats — each layer dries fully before the next goes on. We don't rush the mud schedule to hit a deadline, because callbacks cost everyone time.
Step 4: Walkthrough & Handoff
Before we pack up, we do a raking-light check on every finished surface — the same way a painter will scrutinize the wall before they prime. If anything needs touching up, we do it on the spot. You get a paint-ready surface and documentation of any permit-required work for your records.
Hear it from our happy clients!
“The most beautiful experience we can have is the mysterious. It is the fundamental emotion that stands at the cradle of true art and true science.” Albert Einstein, The World as I See It, 1931 The debate between realism and anti-realism is, at least, a century old.
Frances Wagner
HEAD OF PR
“The most beautiful experience we can have is the mysterious. It is the fundamental emotion that stands at the cradle of true art and true science.” Albert Einstein, The World as I See It, 1931 The debate between realism and anti-realism is, at least, a century old.
Maurice Smith
CREATIVE DIRECTOR
“The most beautiful experience we can have is the mysterious. It is the fundamental emotion that stands at the cradle of true art and true science.” Albert Einstein, The World as I See It, 1931 The debate between realism and anti-realism is, at least, a century old.
Matilda Ellis
ART DIRECTOR
Residential and Commercial Drywall FAQs
For cosmetic repairs — patching holes, replacing water-damaged panels, texture work — no permit is required. Permits are required when drywall work is part of a structural change, a basement conversion to finished living space, or a commercial tenant improvement. We tell you upfront whether your project requires one and pull the sub-permit when it does.
Not always, but the risk is real if the moisture was present for more than 24–48 hours or if the area wasn't fully dried out before being closed up. We assess the framing and insulation before we reinstall — if there's mold on the framing side, you'll know before we button it up rather than after.
Yes, on any home built before 1979. Federal NESHAP regulations and CT DEEP requirements prohibit disturbing asbestos-containing material without proper abatement. We arrange the sample test before scheduling the removal. If the test comes back positive, we coordinate with a licensed CT asbestos abatement contractor to handle removal before we do the resurfacing work.
Both are GA-216 industry standards. Level 4 is the correct finish for walls receiving paint — all joints, angles, and fasteners covered, smooth and consistent. Level 5 adds a thin skim coat over the entire surface and is the standard for ceilings and any wall that will receive flat, matte, or high-sheen paint where raking light will reveal every imperfection. We'll tell you which one your project needs based on your paint and lighting plan.
Yes, and it's one of the things we're careful about. We sample the existing finish — orange peel spray pressure, knockdown trowel weight, skip trowel pattern — before touching the wall. In older Fairfield County homes we frequently encounter hand-applied textures that require a manual approach rather than a hopper gun. A mismatched patch is obvious after paint; we'd rather take the time to get it right.
Typically 24–48 hours after the final coat of topping compound, depending on temperature and humidity — both of which matter in Fairfield County's humid summers and cold winters. The surface also needs a coat of PVA drywall primer before paint; skipping primer is the most common reason painted drywall looks uneven after the fact. We don't include painting, but we'll tell you exactly when the surface is ready.
Drywall repair addresses specific damaged areas — a patch, a replaced panel, a failed tape joint. Skim coating is a full-surface treatment where a thin layer of joint compound is applied across an entire wall or ceiling to restore it to a smooth, uniform finish. If you have one bad spot, that's a repair. If the whole wall has surface damage, failing plaster, or was stripped of wallpaper, skim coating is the right call.
Got drywall damage? We'll take a look this week.
Free on-site estimates — Stamford, Norwalk, Fairfield, and surrounding towns